The EASYCON/CAN... series has been specifically designed for use in CAN systems up to 1 Mbps. It enables quick and convenient connection of the incoming and outgoing bus cable under fieldconditions. The range consists of three quick connectors:
TYPE: EASYCON/CAN-RCF002, 90° Angled cable feed,screw connect.
TYPE: EASYCON/CAN-RCF003, 90° Angled cable feed,screw connect, with D-SUB female socket for the connection of a programming device.
TYPE: EASYCON/CAN-RCF004, 90° Angled cable feed,screw connect, with a Dual line CAN bus protector.
The termination resistor is already integrated in all versions and can be enabled externally using a slide switch. The outgoing bus segment is disabled simultaneously. This makes it easier to start up segment by segment and prevents incorrect termination. In addition to this, the high-quality shielded connector housing also ensures high levels of immunity to interference even at maximum transmission speed. A special feature of the angled connector version is that the internal connection unit can be reversed. This enables you to decide in the field whether the cable is to be fed from the right or the left. If it is not possible to use the angled version, the EASYCON/CAN… compact connector with a straight cable feed is available.
The connectors are designed for all standard CAN bus cables in accordance with CiA Draft Recommendation 303-1 with an outside diameter of 8 mm. It also can support twisted cable without shield with some accessories.
